Spindel Mould for Leather - 10 mm
- Item
- # MT023735
With this spindle mould, you no longer need to estimate where the Leather should be placed under the hole pipe. If you have marked it off with a pen, place the Leather in the template and you will be able to punch exactly in the middle. Suitable for Leather 10 mm.
Spindel Mould for Leather - 10 mm
With this spindle mould, you no longer need to estimate where the Leather should be placed under the hole pipe. If you have marked it off with a pen, place the Leather in the mould and you will be able to punch exactly in the middle. Suitable for Leather 10 mm.
There are extra guidelines on the sides that are 1.5 cm apart. This means that for longer pieces you don't have to mark them out yourself anymore because you can align the holes you have already made.
Only to be used in combination with a 12 mm anvil
Specifications:
- 3D printed
- Colour: Blue
- For making Leather adapters/products
- Suitable for 10 mm leather
- With guiding lines
| Item # | MT023735 |
|---|---|
| Weight | 20 gram |
| Colour | Blue |
| Feed through size | 10 mm |
| Material | Plastic |