Spindel Mould for Biothane Adapter - 19 mm
- Item
- # MT022620
With this spindle mould, you no longer need to estimate where the Biothane should be placed under the hole pipe. If you have marked it off with a pen, place the biothane in the template and you will be able to punch exactly in the middle. Suitable for Biothane 19 mm.
Spindel Mould for Biothane Adapter - 19 mm
With this spindle mould, you no longer need to estimate where the Biothane should be placed under the hole pipe. If you have marked it off with a pen, place the biothane in the mould and you will be able to punch exactly in the middle. Suitable for Biothane 19 mm.
There are extra guidelines on the sides that are 1.5 cm apart. This means that for longer pieces you don't have to mark it out yourself anymore, because you can align the holes you have already made.
Only to be used in combination with a 12 mm anvil
Specifications:
- 3D printed
- Colour: Yellow
- For making biothane adapter
- Suitable for 19 mm Biothane
- With guiding lines
| Item # | MT022620 |
|---|---|
| Sold per | 6 |
| Weight | 22 gram |
| Colour | 96 |
| Feed through size | 692 |
| Material | 306 |