Spindle Hand Press (excl. accessories)
All orders are custom made. The processing time depends on the total amount of orders. Currently the processing time (queue) is: 65 hours
The processing time is adjusted daily. Urgent? Please contact us.
With this hand press and the fitting accessories, you can easily punch holes in leather and biothane and attach rivets or snap buttons.
Spindle Hand Press (excl. accessories)
Easy to make holes and attach rivets
High durability
Lower error rate (compared to working with a punch)
Must attach before use
Excl. necessary accessories
With this hand press and the fitting accessories, you can easily punch holes in leather and biothane and attach rivets or snap buttons. This makes it a practical, multifunctional tool for your dogcollars, -leashes, adapters or halters. The press is made out of cast iron and has dimensions of 80 x 180 x 320 mm.
See here how the spindle works.
Punching holes and pressing rivets
The machine is simple in use, all you need to do is insert the accessories and pull the lever. Because the spindle exerts a downward force and is using the right stamps, the holes will be punched in exactly the right place. When pressing rivets the principle is the same, you only need to switch the accessories.
Spindle and accessories
The spindle hand press has multiple functions and uses different accessories for each one. To make holes you will need the Anvil (available in multiple sizes) and a machine hollow pipe. To attach rivets you will need a Rivet Die Set (available in multiple sizes). You must attach the hand press before use. You can use the Spindlestation, for example. To get a clear overview of the Spindle Accessories and their functions please check out the table below:
Recommended Accessories Spindle Hand Press:
To make holes you will need:
To press rivets together you will need:
Specifications:
- Material: cast iron
- Dimensions: 80 x 180 x 320 mm
- Weight: 3kg
- Colour: Grey
- Screw thread: M7 (Please note: the Effective Diameter is 6.35 mm, your tool insert need to match this size to fit the Spindle Hand Press)
Please note:
- Place an extra layer of biothane or leather under the material in which you make the hole. This will damage the anvil less quickly.
- Please note the Screw Thread is M7, which is the insert for your tools
Tutorial:
SKU: | MT021836 |
Price per: | piece |
Weight: | 3.00 kilograms |
Colour: | Grey |
Attribuutcode In deze kolom niets aanpassen! |
Een korte beschrijvende tekst van het attribuut |
---|---|
max_continuous_length | The Max Continuous Length is the maximum length at which the rope is delivered in one piece. Longer pieces will be delivered in multiple parts. However, an exception can be made to some products. Contact us to see what we can do for you! |
breaking_strength | The breaking strength of a material is the maximum amount of tensile stress that the material can withstand before failure, such as breaking or permanent deformation expressed in kilograms. |
colour_value_pantone | This Pantone colour is closest to the colour of this product. |
colour_value_ral | This RAL colour is closest to the colour of this product. |
rope_material | The Rope Material is the natural or synthetic fiber that is used to produce this rope. |
rope_material_core | The core of this product is a natural or synthetic fiber and is not the same fiber as the sheath around the core. |
In doubt? Order a sample!
Do you want to be just a little bit more sure whether this product is suitable for your project? Order a sample of this product. (ca. 10cm)
Click on the order sample button below to add a sample to your order.
How it works:
You can order 1 sample per product. On your sample card is a discount code that represents the value of this sample. This discount code can only be used when ordering this product with a minimum quantity of 2 units (for example meters).
Please note! The discount code is valid for 2 months.